EZ-LOK Threaded Inserts

95 products

  • E-Z LOK™ - EZ-400-5-CR Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Stainless - 5/16-18

    E-Z LOK E-Z LOK™ - EZ-400-5-CR Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Stainless - 5/16-18

    Online special order

    E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features: Standard kit includes threaded inserts, drill and drive-tool. Easy to use solution for putting strong, machine threads in wood Everything needed for installation in a convenient kit Ideal for cabinetry, furniture, display cases, anywhere a threaded fastener will be used in wood. Kit Contains: (5x) 400-5-CR, (1x) A1260, (1x) DT-5 Applications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.

    Online special order

    $43.89

  • E-Z LOK™ - EZ-400-524-CR Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Stainless - 5/16-24

    E-Z LOK E-Z LOK™ - EZ-400-524-CR Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Stainless - 5/16-24

    Online special order

    E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features: Standard kit includes threaded inserts, drill and drive-tool. Easy to use solution for putting strong, machine threads in wood Everything needed for installation in a convenient kit Ideal for cabinetry, furniture, display cases, anywhere a threaded fastener will be used in wood. Kit Contains: (5x) 400-524-CR, (1x) A1260, (1x) DT-524 Applications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.

    Online special order

    $43.89

  • E-Z LOK™ - EZ-400-524 Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Brass - 5/16-24

    E-Z LOK E-Z LOK™ - EZ-400-524 Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Brass - 5/16-24

    Online special order

    E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features: Standard kit includes threaded inserts, drill and drive-tool. Easy to use solution for putting strong, machine threads in wood Everything needed for installation in a convenient kit Ideal for cabinetry, furniture, display cases, anywhere a threaded fastener will be used in wood. Kit Contains: (5x) 400-524, (1x) A1260, (1x) DT-524 Applications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.

    Online special order

    $41.44

  • E-Z LOK™ - EZ-400-5 Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Brass - 5/16-18

    E-Z LOK E-Z LOK™ - EZ-400-5 Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Brass - 5/16-18

    Online special order

    E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features: Standard kit includes threaded inserts, drill and drive-tool. Easy to use solution for putting strong, machine threads in wood Everything needed for installation in a convenient kit Ideal for cabinetry, furniture, display cases, anywhere a threaded fastener will be used in wood. Kit Contains: (5x) 400-5, (1x) A1260, (1x) DT-5 Applications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.

    Online special order

    $41.44

  • E-Z LOK™ - EZ-400-4-CR Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Stainless - 1/4-20

    E-Z LOK E-Z LOK™ - EZ-400-4-CR Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Stainless - 1/4-20

    Online special order

    E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features: Standard kit includes threaded inserts, drill and drive-tool. Easy to use solution for putting strong, machine threads in wood Everything needed for installation in a convenient kit Ideal for cabinetry, furniture, display cases, anywhere a threaded fastener will be used in wood. Kit Contains: (6x) 400-4-CR, (1x) A1060, (1x) DT-4 Applications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.

    Online special order

    $34.98

  • E-Z LOK™ - EZ-400-428-CR Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Stainless - 1/4-28

    E-Z LOK E-Z LOK™ - EZ-400-428-CR Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Stainless - 1/4-28

    Online special order

    E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features: Standard kit includes threaded inserts, drill and drive-tool. Easy to use solution for putting strong, machine threads in wood Everything needed for installation in a convenient kit Ideal for cabinetry, furniture, display cases, anywhere a threaded fastener will be used in wood. Kit Contains: (6x) 400-428-CR, (1x) A1060, (1x) DT-428 Applications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.

    Online special order

    $34.98

  • E-Z LOK™ - EZ-400-428 Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Brass - 1/4-28

    E-Z LOK E-Z LOK™ - EZ-400-428 Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Brass - 1/4-28

    Online special order

    E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features: Standard kit includes threaded inserts, drill and drive-tool. Easy to use solution for putting strong, machine threads in wood Everything needed for installation in a convenient kit Ideal for cabinetry, furniture, display cases, anywhere a threaded fastener will be used in wood. Kit Contains: (6x) 400-428, (1x) A1060, (1x) DT-428 Applications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.

    Online special order

    $24.76

  • E-Z LOK™ - EZ-400-4 Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Brass - 1/4-20

    E-Z LOK E-Z LOK™ - EZ-400-4 Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Brass - 1/4-20

    185 in stock

    E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features: Standard kit includes threaded inserts, drill and drive-tool. Easy to use solution for putting strong, machine threads in wood Everything needed for installation in a convenient kit Ideal for cabinetry, furniture, display cases, anywhere a threaded fastener will be used in wood. Kit Contains: (6x) 400-4, (1x) A1060, (1x) DT-4 Applications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.

    185 in stock

    $24.50

  • E-Z LOK™ - EZ-400-3-CR Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Stainless - 10-24

    E-Z LOK E-Z LOK™ - EZ-400-3-CR Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Stainless - 10-24

    Online special order

    E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features: Standard kit includes threaded inserts, drill and drive-tool. Easy to use solution for putting strong, machine threads in wood Everything needed for installation in a convenient kit Ideal for cabinetry, furniture, display cases, anywhere a threaded fastener will be used in wood. Kit Contains: (6x) 400-3-CR, (1x) A1060, (1x) DT-3 Applications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.

    Online special order

    $33.06

  • E-Z LOK™ - EZ-400-332-CR Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Stainless - 10-32

    E-Z LOK E-Z LOK™ - EZ-400-332-CR Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Stainless - 10-32

    Online special order

    E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features: Standard kit includes threaded inserts, drill and drive-tool. Easy to use solution for putting strong, machine threads in wood Everything needed for installation in a convenient kit Ideal for cabinetry, furniture, display cases, anywhere a threaded fastener will be used in wood. Kit Contains: (6x) 400-332-CR, (1x) A1060, (1x) DT-332 Applications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.

    Online special order

    $33.06

  • E-Z LOK™ - EZ-400-332 Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Brass - 10-32

    E-Z LOK E-Z LOK™ - EZ-400-332 Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Brass - 10-32

    Online special order

    E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features: Standard kit includes threaded inserts, drill and drive-tool. Easy to use solution for putting strong, machine threads in wood Everything needed for installation in a convenient kit Ideal for cabinetry, furniture, display cases, anywhere a threaded fastener will be used in wood. Kit Contains: (6x) 400-332, (1x) A1060, (1x) DT-332 Applications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.

    Online special order

    $22.88

  • E-Z LOK™ - EZ-400-3 Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Brass - 10-24

    E-Z LOK E-Z LOK™ - EZ-400-3 Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Brass - 10-24

    Online special order

    E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features: Standard kit includes threaded inserts, drill and drive-tool. Easy to use solution for putting strong, machine threads in wood Everything needed for installation in a convenient kit Ideal for cabinetry, furniture, display cases, anywhere a threaded fastener will be used in wood. Kit Contains: (6x) 400-3, (1x) A1060, (1x) DT-3 Applications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.

    Online special order

    $23.41

  • E-Z LOK™ - EZ-400-008-CR Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Stainless - 8-32

    E-Z LOK E-Z LOK™ - EZ-400-008-CR Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Stainless - 8-32

    Online special order

    E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features: Standard kit includes threaded inserts, drill and drive-tool. Easy to use solution for putting strong, machine threads in wood Everything needed for installation in a convenient kit Ideal for cabinetry, furniture, display cases, anywhere a threaded fastener will be used in wood. Kit Contains: (10x) 400-008-CR, (1x) A0860, (1x) 500-1 Applications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.

    Online special order

    $26.44

  • E-Z LOK™ - EZ-400-008 Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Brass - 8-32

    E-Z LOK E-Z LOK™ - EZ-400-008 Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Brass - 8-32

    Online special order

    E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features: Standard kit includes threaded inserts, drill and drive-tool. Easy to use solution for putting strong, machine threads in wood Everything needed for installation in a convenient kit Ideal for cabinetry, furniture, display cases, anywhere a threaded fastener will be used in wood. Kit Contains: (10x) 400-008, (1x) A0860, (1x) 500-1 Applications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.

    Online special order

    $20.88

  • E-Z LOK™ - EZ-400-006-CR Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Stainless - 6-32

    E-Z LOK E-Z LOK™ - EZ-400-006-CR Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Stainless - 6-32

    Online special order

    E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features: Standard kit includes threaded inserts, drill and drive-tool. Easy to use solution for putting strong, machine threads in wood Everything needed for installation in a convenient kit Ideal for cabinetry, furniture, display cases, anywhere a threaded fastener will be used in wood. Kit Contains: (10x) 400-006-CR, (1x) A0860, (1x) 500-1 Applications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.

    Online special order

    $24.18

  • E-Z LOK™ - EZ-400-006 Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Brass - 6-32

    E-Z LOK E-Z LOK™ - EZ-400-006 Pack of 1 - E-Z Knife™ Threaded Insert Installation Kit for Hard Wood - Brass - 6-32

    Online special order

    E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features: Standard kit includes threaded inserts, drill and drive-tool. Easy to use solution for putting strong, machine threads in wood Everything needed for installation in a convenient kit Ideal for cabinetry, furniture, display cases, anywhere a threaded fastener will be used in wood. Kit Contains: (10x) 400-006, (1x) A0860, (1x) 500-006 Applications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.

    Online special order

    $20.03

  • E-Z LOK™ - EK41815 Pack of 1 - E-Z Coil™ Threaded Insert Kit - Economy M30-3.5 x 1.5D

    E-Z LOK E-Z LOK™ - EK41815 Pack of 1 - E-Z Coil™ Threaded Insert Kit - Economy M30-3.5 x 1.5D

    Online special order

    E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.Features: Economy kits include threaded inserts, STI tap, and installation tool. Kit Contains: (3x) 41815, (1x) M1033, (1x) 41875 Applications:Soft metals: aluminum, cast iron, magnesium, etc.

    Online special order

    $717.93

  • E-Z LOK™ - EK41620 Pack of 1 - E-Z Coil™ Threaded Insert Kit - Economy M24-3.0 x 2D

    E-Z LOK E-Z LOK™ - EK41620 Pack of 1 - E-Z Coil™ Threaded Insert Kit - Economy M24-3.0 x 2D

    Online special order

    E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.Features: Economy kits include threaded inserts, STI tap, and installation tool. Kit Contains: (5x) 41620, (1x) M1023, (1x) 41670 Applications:Soft metals: aluminum, cast iron, magnesium, etc.

    Online special order

    $165.64

  • E-Z LOK™ - EK41615 Pack of 1 - E-Z Coil™ Threaded Insert Kit - Economy M24-3.0 x 1.5D

    E-Z LOK E-Z LOK™ - EK41615 Pack of 1 - E-Z Coil™ Threaded Insert Kit - Economy M24-3.0 x 1.5D

    Online special order

    E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.Features: Economy kits include threaded inserts, STI tap, and installation tool. Kit Contains: (5x) 41615, (1x) M1023, (1x) 41670 Applications:Soft metals: aluminum, cast iron, magnesium, etc.

    Online special order

    $164.41

  • E-Z LOK™ - EK41610 Pack of 1 - E-Z Coil™ Threaded Insert Kit - Economy M24-3.0 x 1D

    E-Z LOK E-Z LOK™ - EK41610 Pack of 1 - E-Z Coil™ Threaded Insert Kit - Economy M24-3.0 x 1D

    Online special order

    E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.Features: Economy kits include threaded inserts, STI tap, and installation tool. Kit Contains: (5x) 41610, (1x) M1023, (1x) 41670 Applications:Soft metals: aluminum, cast iron, magnesium, etc.

    Online special order

    $164.41

  • E-Z LOK™ - EK41120 Pack of 1 - E-Z Coil™ Threaded Insert Kit - Economy M14-2.0 x 2D

    E-Z LOK E-Z LOK™ - EK41120 Pack of 1 - E-Z Coil™ Threaded Insert Kit - Economy M14-2.0 x 2D

    Online special order

    E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.Features: Economy kits include threaded inserts, STI tap, and installation tool. Kit Contains: (5x) 41120, (1x) M1016, (1x) 41170 Applications:Soft metals: aluminum, cast iron, magnesium, etc.

    Online special order

    $84.32

  • E-Z LOK™ - EK41115 Pack of 1 - E-Z Coil™ Threaded Insert Kit - Economy M14-2.0 x 1.5D

    E-Z LOK E-Z LOK™ - EK41115 Pack of 1 - E-Z Coil™ Threaded Insert Kit - Economy M14-2.0 x 1.5D

    Online special order

    E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.Features:Quickly repair damaged threads in soft metalProtect tapped holes from stripping and wearMade from corrosion-resistant 18-8 stainless steelApplications:Soft metals: aluminum, cast iron, magnesium, etc.

    Online special order

    $54.21

  • E-Z LOK™ - EK41110 Pack of 1 - E-Z Coil™ Threaded Insert Kit - Economy M14-2.0 x 1D

    E-Z LOK E-Z LOK™ - EK41110 Pack of 1 - E-Z Coil™ Threaded Insert Kit - Economy M14-2.0 x 1D

    Online special order

    E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F. E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.Features: Economy kits include threaded inserts, STI tap, and installation tool. Kit Contains: (1x) 41170, (1x) M1016, (5x) 41110 Applications:Soft metals: aluminum, cast iron, magnesium, etc.

    Online special order

    $78.52

Login

Forgot your password?

Don't have an account yet?
Create account